top of page
Maple has long been the standard for resonator guitar bridges.
My maple bridges were designed specifically for the Thunder and Lightning Resonator cones.
1.5" diameter .25" tall without saddle
These are left unfinished to allow you to stain or paint to match your work.
They are slotted to accommodate either a bone or bolt saddle.
A 1/4" bolt is what is typically used by Cigar Box Guitar Luthiers but you may need to adjust according to your fretboard height.
I sometimes offer these in other types of wood so be sure and check back often.
If they are sold out you can contact me and I will let you know when the next batch might be available.
Click here to order
These biscuit bridges work great on standard CBG's as well as resonators
bottom of page